skip to main text

Safety Precautions

Safety Precautions

  • The important notice and the safety precautions that you should know are described in this manual.
  • Each safety standard mark and declaration is valid only for the voltage and frequency of the respective country or region where it applies.

Warning

  • Read carefully and follow the instructions below. Ignoring the instructions may lead to fire and electric shocks.
    • Do not place the product close to the flammable solvents such as alcohol or thinner.
    • Do not use cables other than the one supplied.
    • Unplug the USB cable when lightning occurs.
    • Do not take apart or modify the product and accessories.
    • Do not use flammable sprays near the product.
    • Unplug the USB cable before cleaning.
    • Do not use flammable spray or liquids such as alcohol or thinners for cleaning.Wipe with a soft dry cloth.

      If you drop metallic part or spill liquid into the product, hear unusual noises, see smoke, feel excessive heat, smell anything unusual, immediately unplug the USB cable and call for service. Using the product under this condition may result in fire or electrical shock.

      When not in use for extended periods, unplug the USB cable for safety.

General Notices

Choosing a location

  • Do not install the scanner in a location that is unstable or subject to excessive vibration.
  • Do not install the scanner in locations that are very humid or dusty, in direct sunlight, outdoors, or close to a heating source.

    To avoid the risk of fire or electric shocks, use the scanner under the operating environment specified in the Online Manual.

  • Do not push the scanner into a narrow cabinet or put a tablecloth on it or place on a thick rug. If the scanner generates heat by doing so, it may cause damage.
  • Do not set up in areas where there are excessive fluctuations in temperature. Also do not move the scanner from low-temperature areas to high temperature areas. Condensation may cause image errors. Leave the scanner enough time to gradually adapt to the new conditions before use.
  • Do not place the scanner in areas with high humidity, areas subject to direct sunlight, areas with high temperatures and areas near flame sources. Fire or electrical shock may result.
  • Leave enough space (approximately 8 in. (20 cm)) around the scanner when setting up.

Power Supply

  • When unplugging the USB cable, always pull on the main body. Pulling the cable may damage the wires and lead to fire or electrical shock.
  • Do not apply excessive force to plug or unplug USB cable.
  • Do not damage or modify the USB cable.
  • Do not place heavy objects on, pull or excessively bend, twist or tie the USB cable.
  • Do not twist or tie the USB cable.
  • Plug the USB cable completely into the connector.

Working around the scanner

  • When setting up the stand, read carefully the paper manual for setting up the stand and place the scanner on the stand correctly.
  • Keep the document cover closed except when necessary.
  • Never put your hands or fingers in the scanner while it is scanning.
  • Hold the scanner firmly with both hands at two ends when carrying it.
  • Do not place any objects on the scanner, especially paper clips, staples and other metallic part or containers filled with alcohol, thinners or other flammable liquid.
  • Always release the scanner lock before connecting the scanner to a computer.

    Running the scanner while it is locked will damage the scanner.

  • When loading a thick book on the platen glass, do not press hard on the document cover.

    The platen glass may break.

  • Do not release the document cover until it completely opens/closes.
  • Do not place items that weigh 2.0 kg (4.4 lbs.) or more on the platen glass. Also, do not press heavily (i.e., more than 2.0 kg (4.4 lbs.)) on the document cover or the platen glass.
  • Do not drop heavy books or objects on the scanner. Also do not give a shock to the platen glass. The platen glass may break.